FST-100 Door crane dedicated frequency converter
The FST-100 series door controller is a specialized variable frequency door drive controller for elevator doors, cold storage doors, subway doors, and other door systems. It integrates door opening and closing logic control and motor drive control. The external system only needs to provide door opening and closing commands to achieve control of the entire door system. This controller can drive AC asynchronous motors and permanent magnet synchronous motors, and supports two modes: speed control and distance control. The product has a wide range of applications and can meet the control and driving needs of most door systems.
Power range
200W/400W/750W
Input voltage
220V single-phase input and 220V three-phase output
Product Overview
-
Automatic Door
-
Induction gate
-
COLD STORAGE DOOR
Features
- Same asynchronous integrated closed-loop control;
- Can be controlled through communication or IO, efficient and secure;
- One click debugging, automatic curve generation, simple and easy to use;
- Gate knife distance learning for more accurate and smooth running curves;
- High protection function, over/under voltage protection, over current protection, phase to phase short circuit protection, output phase loss protection, power outage anti pinch protection;
- Maintain torque adaptation and output torque to maintain dynamic balance of the door system;
- Inertia recognition of door system: automatically determine the operating kinetic energy, friction force, self closing force, etc., and constrain the output of the door machine driver.
Technical Specifications
| item | Subproject | Technical indicators |
|
performance control |
Maximum output frequency |
99.00Hz |
| Speed range | 1: 50 (magnetic flux vector control): 1: 100O (closed loop vector control) | |
| Steady speed accuracy | ±0.5% (flux vector control): ±0.05%% (closed-loop vector control) | |
| Starting torque | 0Hz - 180% (closed loop vector control): 1Hz - 150% (magnetic flux vector control) | |
| buccal resolution | 0.01Hz | |
| Current resolution | 0.01A | |
| Carrier rate | 2.0kHz ~ 16.0kHz | |
|
Main Function |
For AC asynchronous machines, it supports static and dynamic tuning of motor parameters; For AC permanent magnet synchronous machines, it supports tuning of motor parameters and encoder zero position in no-load and on-load modes. |
|
|
Supports AC permanent magnet synchronous machine closed-loop vector control under ordinary ABZ encoder mode, encoder open collector output or push-pull cure method |
||
| Under magnetic flux vector control, it supports functions such as automatic torque boost, manual torque boost, and over-excitation. | ||
| Support door width self-learning function | ||
| Support automatic demonstration function | ||
| Support automatic recognition function when encountering obstacles | ||
| Support one-click debugging function | ||
|
Protect Function |
Controller overload protection: rated current 150% protection for 1 minute, 180% protection for 1 second | |
|
Support controller over-voltage protection, under-voltage protection, over-current protection, output phase loss protection, phase-to-phase short circuit protection, power outage anti-clamping protection and other protection functions |
||
|
environment Require |
Installation Environment | Indoors, away from direct sunlight, dust, corrosive gases, flammable gases, oil mist, water vapor,Salt, etc. |
| Altitude | Below 1000m, please derate when above 1000m. | |
| Ambient temperature | -10℃~+40℃(Ambient temperature is between 40℃~50℃, please derate) | |
| Humidity | Less than 95%RH, no condensation of water droplets | |
| Vibration | Less than 5.9ms(o.6g) | |
| Storage temperature | -20℃~+ 60℃ | |
| Cooling method | 0.2kW adopts self-cooling method, 0.4kW and 0.75kW adopt air-cooling method. | |
| Protection level | IP20 | |
| Storage place | Store in a clean, dry indoor location | |
| Means of transportation | In standard packaging boxes, it can be transported by cars, trains, airplanes, ships, etc. | |
| Transportation vibration | When sine vibration is 9~200Hz: 15m/s²(1.5g) | |
Product Parameters
| Model no. | Power | output current | Input voltage | Size（mm） | Installation size（mm） | G.W |
| FST-100-0R2S2 | 0.2KW | 1.3A | 220V | 215*145*65 | 205*130 | 1.08KG |
| FST-100-0R4S2 | 0.4KW | 2.3A | 220V | 215*145*65 | 205*130 | 1.08KG |
| FST-100-0R7S2 | 0.75KW | 4A | 220V | 215*145*65 | 205*130 | 1.08KG |
Download 
Contact Us
